Gorilla Coatings
Gorilla Coatings Epoxy Crack Filler
Gorilla Coatings Epoxy Crack Filler
Couldn't load pickup availability
Gorilla Paste is a two component 100% solids epoxy crack filler designed for shallow repair on either vertical or horizontal surfaces. This product is easy to mix and use and has a non-critical mix ratio. Additionally, the product, because it is a 100% solids formulation, can be applied thicker on horizontal surfaces when required.
RECOMMENDED FOR: Recommended for repairing cracks and defects in concrete or masonry.
SOLIDS BY WEIGHT: 100%
SOLIDS BY VOLUME 100%
VOLATILE ORGANIC CONTENT: Less than 11 g/L
STANDARD COLORS: Gray (when mixed)
RECOMMENDED FILM THICKNESS: 1/8” cracks or thin build repairs.
COVERAGE PER GALLON: 0.13 cubic feet or 1,228 lineal feet @ 1/8” x 1/8”
PACKAGING INFORMATION
2 gallon kit= 1 gallon part A @ 11.1 pounds and 1 gallon part B @ 11.2 pounds (22.3 pounds net).
10 gallon kits (111.5 pounds net) (volumes and weights approximate)
MIX RATIO: 1 part A to 1 part B by volume
SHELF LIFE: 6 months in unopened containers
ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles = 36 mg loss
FLEXURAL STRENGTH: 7,500 psi @ ASTM D790
COMPRESSIVE STRENGTH: 8,710 psi @ ASTM D695
ADHESION: 350 psi @ elcometer (concrete failure, no delamination)
VISCOSITY: Mixed = > 3,100,000 cps (typical)
DOT CLASSIFICATIONS: Part A “not regulated” Part B “not regulated”
TENSILE STRENGTH: 6,256 psi @ ASTM D638
ULTIMATE ELONGATION: 2.4%
GARDNER VARIABLE IMPACTOR: 50 inch pounds direct – passed
HARDNESS: Shore D = 65
HEAT DEFLECTION TEMP.: 59 degrees C (138 degrees F)
PRIMER: None necessary
TOPCOAT: Optional: This product can be over coated with many suitable epoxy and urethane products.
For Safety Data Sheet, Please Download SDS
For Technical Data Sheet, Please Download TDS
Share
