Gorilla Coatings Polyaspartic Urethane

Gorilla Coatings Polyaspartic Urethane is a solvent based two component 85% solids polyaspartic aliphatic urethane clear coating. It has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear gardner color. However, the outstanding feature of this product is its exceptionally quick tack free time of around 1-2 hours for foot traffic. 

RECOMMENDED FOR: Recommended for areas where a thin/medium build clear coat is desired over a broadcast system and installation downtime is very limited. This product is suitable as a thin/medium build coating only

VOLATILE ORGANIC CONTENT: Less than 159 grams per liter

RECOMMENDED FILM THICKNESS: 2-8 mils wet.

COVERAGE PER GALLON: 200-800 square feet per gallon.

PACKAGING INFORMATION: 1 ½ gallon kit, 3 gallon kit (net approximately)

FINISH CHARACTERISTICS: Gloss (>70 at 60 degrees)

COMPRESSIVE STRENGTH: 12,000 psi @ ASTM D695

TENSILE STRENGTH: 3,900 psi @ ASTM D638

ULTIMATE ELONGATION: 2.4% HARDNESS: Shore D= 80

ABRASION RESISTANCE: Taber abraser CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 21 mg loss 

For Technical Data Sheet, Please Download TDS