Stamp Concrete Surface Delay Film Forming Liquid Surface Delay™
$0.00
Surface Delay is a transparent blue, soapy odor, non-hazardous, concentrated, film-forming solution that is designed to retard the initial evaporation of water from freshly placed concrete or stamp overlay during finishing operations. Surface Delay is especially effective for conditions that include high...
Slow Concrete Delay Cure Additive Liquid SureCrete’s Retarder™
$0.00
SureCrete’s Retarder is a safe non-hazardous, water-borne retarder for cementitious products. It was designed specifically to slow the set of Sure-Tex, SureSpray, or SureStamp that are seasonally adjusted to “winter” mix design. While a more rapid set is a desirable feature for...
Concrete Overlay Bonding Agent SureBond™
$0.00
SureBond™ is a single component, just add water, cement-based overlay bonding agent specifically developed for use with SureStamp™ and Deep Patch™. Its only function is to join these products to the host surface like concrete. It’s high cement content, and dry copolymer agents create...
Liquid Concrete Polymer Concentrate SC Polymer™
$0.00
SC Polymer™ is a 55% solids copolymer emulsion (vinyl acetate-ethylene or VAE) designed for use as a fortifying admixture for cement based products. It offers these advantages: Improved Adhesion Reduced Permeability Increased Abrasion Resistance Assists the Curing Process Improved Flexural Strength Improved...
Thick Concrete Repair Large Hole Patching Product Deep Patch™
$0.00
Deep Patch™ is a single component, cement-based patching compound that goes from 1/8 inch – 2 inch (.32 - 5 cm) and up to 4 inches (10 cm) with the addition of # 8 pea gravel. Deep Patch™ requires SureBond (see TDS)...
Small Hole Thin Concrete Repair Patching Fast Setting – Flash Patch™
$0.00
Flash Patch is a single component, high compressive strength, self-bonding, cement-based patching compound that sets up rapidly, with a 10 minute working time. Due to its relatively fine aggregate (sand) it may be feathered to nearly zero. Flash Patch may be overlaid...
Carpet Glue Remover for Concrete Mastic Adhesives Removal GlueRemove™
$0.00
GlueRemove™ is safe non-inflammable, water-based glue and mastic remover that effectively softens and removes most types of carpet adhesives and similar glue deposits.
Benefits
Nonflammable & Non-Combustible
Odor Free
Water Cleanup
Tech Data Sheets
SDS Data Sheet
Water Based Acrylic Sealer Stripper and Acrylic Paint Remover EnviroStrip™
$0.00
Envirostrip is a non-flammable, water based stripper for clear and/or pigmented acrylic sealers. It is also designed to help remove deeply embedded greasy soil on concrete floors and surfaces. It has a pleasant fresh citrus smell and performs effective stripping without the...
Solvent-Based Concrete Sealer Remover Coating Stripper FastStrip Plus™
$0.00
Fast Strip Plus™ is a high-powered, solvent based stripper for heavy coatings and the most difficult to remove sealers. Specially formulated to be used when mechanical removal is not desired. Fast Strip Plus can be used outside, wherever water can be used...
Epoxy Concrete Repair Crack Treatment and Concrete Crack Filler – SCT-EP™Concrete Crack Repair and Treatment
$0.00
SCT-EP Epoxy Crack and Spall Treatment is a traditional epoxy system to effectively treat cracks and quickly fill spalls or voids in concrete. The system is economical not only in product costs, but also in tools required for its application. SCTEP Epoxy...
Concrete Crack Treatment and Repair – Fast Drying Urethane Product SCT-22™
$0.00
SCT-22™ is a rapid set, technologically advanced, high strength, ultra-low viscosity urethane treatment material. This 2-part, 1:1 system is 100% solids, no VOC’s and designed for rebuilding spalls and treating static cracks in concrete very quickly. SCT-22 may be used prior to...
SureCrete’s Class 1 Concrete Moisture Barrier and Vapor Blocker DK 700™
$0.00
DK 700 is a 2 component solvent-based urethane primer, 97% solids, low VOC (<40 g/L), class 1 vapor barrier that meets ASTME96-E93. DK 700 stops water vapor transmission, to less then 1/2 pound per 1,000 sq. ft. This unique water vapor barrier...
