Mortars/Slurries

Mortars/Slurries

NP110: Regular Form Epoxy Mortar

$0.00

NP110: Regular Form Epoxy Mortar

$0.00
  110 is a three component 100% solids epoxy mortar designed for applications where excellent wear characteristics and strength are required. RECOMMENDED FOR: Recommended for heavy traffic areas, forklift traffic and steel wheel equipment production areas. NOT RECOMMENDED FOR: Immersion applications for...
Add to Compare Remove Compare

Pigments for 903SL, 903CB, 903M, 903TC

$0.00

Pigments for 903SL, 903CB, 903M, 903TC

$0.00
For Safety Data Sheet, Please Download Tan SDS  For Safety Data Sheet, Please Download Gray SDS  For Safety Data Sheet, Please Download Red SDS 
Add to Compare Remove Compare

NP903TC: Urehane Slurry/Mortar Topcoat

$0.00

NP903TC: Urehane Slurry/Mortar Topcoat

$0.00
NP903TC is a bio-based four component urethane topcoat for the NP903SL that has been broadcasted with aggregate. The product has good thermal shock capabilities when used with the NP903SL slurry system and is a good choice for hot wash down areas. The...
Add to Compare Remove Compare

NP903SL: Urethane Slurry

$0.00

NP903SL: Urethane Slurry

$0.00
NP903SL is a bio-based three or four component (dependent on color) urethane slurry that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product has good thermal shock capabilities and is a good choice for hot...
Add to Compare Remove Compare

NP903M: Urethane Mortar

$0.00

NP903M: Urethane Mortar

$0.00
NP903M is a bio-based three or four component (dependent on color) trowel applied urethane mortar that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product has good thermal shock capabilities and is a good choice...
Add to Compare Remove Compare

NP903CB: Urethane Cove Base

$0.00

NP903CB: Urethane Cove Base

$0.00
NP903CB is a bio-based three or four component (dependent on color) trowel applied urethane Cove Base kit that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product can withstand thermal shock, impact, abrasion and chemical...
Add to Compare Remove Compare

NP130: Coal Tar Formulation Mortar

$0.00

NP130: Coal Tar Formulation Mortar

$0.00
NP130 is a three component 100% solids epoxy mortar designed for applications of petroleum contaminated concrete or for patching asphalt. RECOMMENDED FOR: Recommended for traffic area resurfacing and patching of asphalt or petroleum contaminated concrete and cement. NOT RECOMMENDED FOR: Immersion applications...
Add to Compare Remove Compare

NP128: Arctic Formulation Mortar

$0.00

NP128: Arctic Formulation Mortar

$0.00
  NP128 is a three component 100% solids epoxy mortar designed for applications where temperatures are as low as minus 10 degrees F. (-10°F) RECOMMENDED FOR: Recommended for cold storage areas, freezers or general outdoor patching in the winter. NOT RECOMMENDED FOR:...
Add to Compare Remove Compare

NP126: Cold Weather Formulation Mortar

$0.00

NP126: Cold Weather Formulation Mortar

$0.00
  NP126 is a three component 100% solids epoxy mortar designed for applications where floor temperatures are between 35 and 60 degrees F. RECOMMENDED FOR: Recommended for heavy traffic areas in cold storage areas or for outdoor use during the fall and...
Add to Compare Remove Compare

NP125: Quick Patch Mortar

$0.00

NP125: Quick Patch Mortar

$0.00
  NP125 is a three component 100% solids epoxy mortar designed for applications where temperatures are between freezing or a rapid patch is necessary. RECOMMENDED FOR: Recommended for cold storage areas, freezers, walkways and support bases for tanks and heavy traffic areas....
Add to Compare Remove Compare

NP124: Freezer Formulation Mortar

$0.00

NP124: Freezer Formulation Mortar

$0.00
: NP124 is a three component 100% solids epoxy mortar designed for applications where temperatures are below freezing or a rapid patch is necessary. RECOMMENDED FOR: Recommended for cold storage areas, freezers, walkways and support bases for tanks and seamless floors. NOT...
Add to Compare Remove Compare

NP123: Food Formulation Mortar

$0.00

NP123: Food Formulation Mortar

$0.00
NP123 is a three component 100% solids epoxy mortar designed for applications where floors are subjected to repeated exposure to hot water cleanings. RECOMMENDED FOR: Recommended for heavy traffic areas where cold floors are repeatedly washed with hot water – such as...
Add to Compare Remove Compare
Showing 1 - 12 of 18
×

Someone recently bought a

This website uses cookies to ensure you get the best experience. Learn more
Ok, Got It

Your cart

×