Gorilla Coatings provides full industrial and commercial systems used nationwide and made in the USA. From epoxy mortars and urethane cement slurries, to high build epoxies and ESD systems. With an extensive selection of urethane top coats and compatible color packs. We even have roof coatings and parking deck options. Ready to be picked up in our Linden, NJ location.
Gorilla Coatings provides full industrial and commercial systems used nationwide and made in the USA. From epoxy mortars and urethane cement slurries, to high build epoxies and ESD systems. With an extensive selection of urethane top coats and compatible color packs. We even have roof coatings and parking deck options. Ready to be picked up in our Linden, NJ location.
NP013 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. NP013 has good chemical resistance, abrasion resistance, and substrate penetration. This product has a tack free time of about 3 hours and can support...
translation missing: en.general.accessibility.error Quantity must be 1 or more
Gorilla Coatings Polyaspartic Urethane is a solvent based two component 85% solids polyaspartic aliphatic urethane clear coating. NP344 has excellent chemical resistance, hardness, abrasion resistance, UV stability and has an excellent clear gardner color. However, the outstanding feature of this product is...
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP010 is a two component water based high performance epoxy concrete sealer/primer that exhibits characteristics that rival solvent based products. NP010 has superb chemical resistance, abrasion resistance, and substrate penetration. RECOMMENDED FOR: Recommended for priming or coating concrete or masonry. This product...
translation missing: en.general.accessibility.error Quantity must be 1 or more
Gorilla Coatings high build epoxy is a two component 100% (+/- 1%) solids epoxy colored coating designed for applications where a high build colorfast impact resistant floor is needed. RECOMMENDED FOR: Recommended for a high build topcoat or basecoat on concrete or...
Available SizesAvailable Colors
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP903SL is a bio-based three or four component (dependent on color) urethane slurry that has outstanding wear performance and can withstand higher heat exposures than typical unmodified urethanes. The product has good thermal shock capabilities and is a good choice for hot...
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP903TC is a bio-based four component urethane topcoat for the NP903SL that has been broadcasted with aggregate. The product has good thermal shock capabilities when used with the NP903SL slurry system and is a good choice for hot wash down areas. The...
translation missing: en.general.accessibility.error Quantity must be 1 or more
Polyaspartic pigment is a 100% solids reactive pigment designed for use with polyaspartic coating systems. The polyaspartic pigments are based on polyaspartic chemistry and as such have good color stability and good UV stability. These pigments are typically added to a base...
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP671 is a two component 100% solids epoxy seal coat that can be used either as a coating or filled with paint chips, marble chips and colored sand mixtures to provide an infinite array of color schemes or patterns. This product can...
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP449 is a two component 95% solids polyaspartic aliphatic polyaspartic sealer. This material can be used as the base coat and the topcoat over paint chip decorative broadcasts or colored sand broadcasts to provide an infinite array of color schemes or patterns....
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP359 is a three component aliphatic urethane floor finish that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. RECOMMENDED FOR: Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, and some chemical exposure areas....
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP343 patch kit consists of a two component polymer packaged with aggregate for patching and repairing concrete. RECOMMENDED FOR: Industrial repairing of spalled concrete, holes, cracks and thresholds or uneven concrete slabs. NOT RECOMMENDED FOR: Expansion Joints. SOLIDS BY WEIGHT: Nearly 100%...
translation missing: en.general.accessibility.error Quantity must be 1 or more
NP443 is a two-component, polyurethane hybrid specially designed with an ultra-low viscosity providing a quick repair of hairline cracks and spalls in concrete. With its fast curing properties, it is perfect for use when minimal downtime is required and rapid return-to-service is...
translation missing: en.general.accessibility.error Quantity must be 1 or more